Wing Nut, Hook or Eye Bolt Drill Bit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows you to use your drill to loosen or fasten Wing Nuts, Hooks or Eye Bolts.
- Ocena
- 4,667 / 5
- Polubienia
- 230
- Pobrania
- 733
- Wydruki
- 8
- Wyświetlenia
- 2325
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This bit is compatible with ½ inch chucks. The shaft is oversized because of course it's plastic.
This bit allows you to fasten or loosen several atypical fasteners.
No supports are required for the print.
Materials
I recommend printing this in PLA+, PETG or Nylon with strength improving settings, such as smaller nozzle, thinner layers higher wall count, and higher infill percent.
- Prusa Nylon CF: https://www.prusa3d.com/product/prusament-pa11-carbon-fiber-black-800g/
- Overture Easy Nylon: https://amzn.to/3ujukh3
- Overture Super PLA+: https://amzn.to/3stq65Z
Helper Models Used
Font: https://www.fontget.com/font/fighting-spirit-turbo-family/
Drill: https://free3d.com/3d-model/cordless-drill-v2--761243.html
Bolt & Nut: https://www.mcmaster.com/
Helpers were used just in renders and are not apart of this design.