1 / 2
Ender 2 Pro - filament and hotend-wiring guide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide to keep the hotend wiring away from the build volume and lead the filament into the extruder.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
When attaching the hotend wiring to the guide, be sure to first move the Z-Axis all the way up.
To safely guide the filament, stick some 2-3cm tube between the arches like shown in the original photos.
The original model by @GatCode plans for a Limit-Switch to fit between the filament guide arches. I have not tested if that still fits.