Crayon Holder for 48 Crayons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variation of my Art Pencil Holder for crayons.
- Ocena
- 4,667 / 5
- Polubienia
- 53
- Pobrania
- 374
- Wydruki
- 5
- Wyświetlenia
- 1871
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A variation of my [Art Pencil Holder](https://www.prusaprinters.org/prints/63392-art-pencil-holder) for crayons.
This model is inspired by this very sleek design, but I redeigned it from scratch in Fusion 360. I wanted a base and a lid with a place for some text. The STL file of the lid does not have any text, but the included Fusion 360 model does have placeholder text that you can modify. In the picture you will see printed versions with debossed text shown.
Also shown in the picture are optional mini toggle latches. They can be screwed into the side of the print with short self-tapping screws if you want them.
This is a variant of my pencil holder design.
Print Settings
- Printer: Various
- Rafts: No
- Supports: No
- Resolution: 0.2mm
- Infill: 20%
- Filament: CC3D Shiny Silk PLA
Notes
- The lid is designed to be printed with the top on the build plate. The countered area that mates with the base is designed so that you can print in this orientation with no supports required.
- If desired, you can add the latches be screwing directly into the PLA with small self-tapping screws.