Adjustable stand and wall mount for weather station rain gauge (Ecowitt, Froggit, Fine Offset, Ambient Weather)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple ball joint stand or wall mount for rain gauge.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 1100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
My Froggit weather station includes the Froggit DP80 rain gauge. It came with a 32mm, 200mm long, mounting pole and brackets to screw to the rain gauge. This design has a ball that fits around the pole and a joint type stand to screw to a firm and stable surface. The ball joint allows for perfect positioning (up to 9 degrees of freedom) with the help of the built-in circular spirit level on top of the rain gauge controller box. It uses 3 M4/16mm screws and M4 nuts to secure the ball joint. The mounting holes are 6mm in diameter.
So far I've seen this rain gauge as:
- Ambient Weather WS-5000
- Ecowitt WH40
- Fine Offset WH40
- Froggit DP80
Update 07-01-2025
I had to find another place to mount my rain gauge and decided on mouting it at the top of the wall of a shed. For that I created new parts. Part A which mounts to the wall and allows the existing ball joint with the standard pipe to slide in from below and part B which screws in at the bottom of part A to secure the ball joint. Adjustability remains the same as before. The threaded parts have 0.4mm play between them. Applying a bit of silicon grease to the threaded parts will make it screw in more smoothly. Mounting holes in part A are 4mm.