Battery Cover for Schonstedt GA-92XTd
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery cover replacement for the iron detector
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a battery cover for the Schonstedt GA-92XTd.
I needed one after I had to break the old cover to open the device for repair. It was only working when not extended, but there was a really simple fix: replace the standard 55cm 1mm pitch 14 pin FFC cable.
I used a 28mm M2 flathead screw to act as the new pin; on the other side, there is a 4mm long heat set insert. I put a dab of screw fixator on so it won't come out in the field, hopefully. Facing the device I glued on some EPDM foam to hopefull have it somewhat watertight.
Onshape: https://cad.onshape.com/documents/8f4b51e52937742573e45783/w/d306e33a781320e25c90e9b7/e/f9c93924ef6e34f6fe2c68d3