1 / 3
Sound Dampening Anti Vibration feet for Prusa  MK4 MK3 — zdjęcie 1
1 / 3

Sound Dampening Anti Vibration feet for Prusa MK4 MK3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These feet absorb vibration and dampen noise from 3D printer. They attach to the 30x30 extruded Aluminum.

Ocena
0 / 5
Polubienia
9
Pobrania
43
Wydruki
0
Wyświetlenia
708
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

These feet attach to the 30x30 extrusion and are held in place with M6 x 10mm hex head cap screws. The vibration dampening is done by these 1 ½ inch Vibration Isolation Washer Rubber Isolation Pads:

https://www.amazon.com/gp/product/B0BGX2XVK7

In addition to the anti vibration rubber, for each foot you will need :

One (1) - M6 x 10mm hex head cap screw

One (1) - M6 T nut for 30x30 extrusion

The printer is raised 5mm compared to the standard Prusa anti vibration foot.

I thought six was the right number to use, and the printer is much quieter. Works great for input shaper mode. 

Tagi