1 / 6
BaMaKey TP-iii / TP-3 paddle holder - BaMaTech - Mk2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a nice little holder/ protector for your BaMaKey TP-iii (second edition)
- Ocena
- 4,75 / 5
- Polubienia
- 32
- Pobrania
- 729
- Wydruki
- 5
- Wyświetlenia
- 3038
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 5) (Komentarze: 10)Remiksy (1)Kolekcje (41)Powiązane
A Little holder/protector for your BaMaKey TP-iii - from BaMaTech. Pretty self explanatory. The main holder slides nicely into the outer sleeve - like a matchbox etc. There is a recess and a tab to keep it clicked shut - works well. There is a cutout on the other end to push the central piece out.
6 DEC 2024 Updates made to model..
- Added a little space around the key so it is not such a tight fit
- added a cutout underneath to push the key out easily with index finger
- changed the dimensions of the inner and outer such that it closes more snugly and will not unintentionally come open in your backpack etc.
- you need to squeeze the sides a little to get it to open
- you might like to file down a bit from the notch if it is too tight for your liking.
- Recessed the brand on top
- has a little indicator triangle on the end to orient with.
- there was some discussion that the dimensions of the key had changed over time - I have confirmed with BaMaKey that the dimensions have never changed since the first one.
Printed using ;
- PETG
- No supports required
- Default settings on Bambu X1C