1 / 2
Socket Clip Optimal Print Orentation
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a height-adjustable socket clip, fits from 26mm to 46mm height sockets.
It is based on the design and iteration from, @wuguigui and @jatkinson10
a downside of the original design was the clip attached to the base, would be printed in a way that resulted in it being weaker due to layer lines. this was addressed, by @jatkinson10 's remix. however this remix lacks a flat head screw model and required support and the clip was free-floating unless screwed down.
This remix addresses those downsides, making the clip attach from the top and retained in the base unit without being screwed down.