1 / 2
Table Organizer - AKN Container-Style
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of AKN Container with various modules usable as business-card-holder, drawer or pen-stand
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)Powiązane
The model contains multiple parts and is designed to allow the walls to be customable adapted.
Current Models:
Business Card-Holder:
- Drawer-Box - Main Component
- Card-Top - Open Top with 9,5cm opening for business cards
- FloorRibbon - Inlay to keep Cards upright
- Sides Front, Right, Rear, Left to insert into the walls of the Box.
- Drawer - insert into bottom opening.
- After assembly optionally glue top to box fixing everything in place
Pencil-Stand:
- Empty-Box - Main Component with one opening from top down to the floor
- Compartment-Top - Top-Component with mutliple separations(2x3)
- Sides Front, Right, Rear, Left to insert into the walls of the Box.
- After assembly optionally glue top to box fixing everything in place
Known Issues:
- Drawer has no handle. Working on hidden push-to-open functionality
- Printing as PETG without enclosure creates severe warping of the base so that sides do not slide fully down (~0,5mm gap in the middle). Works when printing Base and Top at 50% speed.
Updates:
- Reduced Drawer x-dimension to fit fully into the compartment