PETG Temperature Tower for Prusa MK4, .4mm nozzle and Input Shaping
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Temperature Tower remix for the Prusa MK4 with a .4mm nozzle, Input Shaping, .20mm layer SPEED profile
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 725
- Wydruki
- 11
- Wyświetlenia
- 2345
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly.
Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking on the orange plus sign in the sliced view.
“OK, I printed it, now what?” This guide from 3DMaker Engineering is the best guide I've seen and actually refers to the model by gaaZolee on Thingiverse. As stated on 3DMaker's website, “look at the tower and decide which zone visually looks the best. Look for things like bridging capability, small feature printing, and overhangs.” That's a good start!