Asus MB169C+ Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of Legs to hold Asus MB169C+ Monitor. Designed for use with Dell Latitude 5591 Laptop, because the included…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Set of Legs to hold Asus MB169C+ Monitor.
Designed for use with Dell Latitude 5591 Laptop, because the included folding cover/stand is a nice cover, but a terrible stand.
One leg has an opening to allow the USB-C cable connection.
Holds monitor at the same height as the main display at an angle of 80 Degrees.
Additional set uploaded to work with Dell XPS 15 (2019) at an angle of 70 Degrees.
Pictures show parts printed on PrusaMk3 with 0.6 Nozzle using Urban Grey Prusament PETG.
Original Solidwork part files included if you would like to further edit the parts.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.25mm
Infill:
15
Filament:
Prusament PETG Urban Grey
Notes:
Printed with 0.6 Nozzle.
Could also be printed with a 0.4 nozzle with sufficient perimeters and infill.
Category: Computer