Clue Jr Game Pieces - Stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed some of the missing game pieces, so I made them. From Case of the Missing Cake.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 133
- Wydruki
- 1
- Wyświetlenia
- 513
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
WHAT IS IT?
Many Clue Jr. games come with little cardboard game pieces for each character and a piece of furniture in each room. You have 7 yellow and 7 white stands for the pieces. You usually have stickers underneath, but that isn't needed with these pieces. One yellow piece has “crumbs” pictured on it. Five of the white pieces have times 1pm through 5pm, with two blanks.
WHY MAKE THEM?
The set we bought used had damaged/missing stickers and several missing white stands. So I made replacements. You could print individual pieces, but they will look different. So, it's best to print them all, so they all look the same. These are the pieces we use when we play.
I didn't make the drinks, because they would be hard to tell apart. But the one with the target looking center… those are built-in supports. The bottom is recessed, but flat, so you can put stickers on those, or glue in pictures or paper. If you have ideas for making those better, let me know.
PRINT SETTINGS
- 2 or more walls
- any layer height (just ensure it is the same for each)
- any plastic (don't recommend silk filaments. The have poor layer adhesion and will break easily)
- No supports needed
- No brim needed
Any issues, let me know and I will fix them. I made these long ago in Tinkercad, and was clearing out models, so figured i would share. I could make something much cleaner in Fusion now, but these work great, so I haven't needed to.