Mad Max external GPU Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mounting system to slap a GPU on the outside of your case, Mad Max style.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 2127
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Got a small form factor office PC that you want to turn into a gaming rig? I got you.
This is is my mount that I made in about 10 minutes in TinkerCAD to mount a GPU to the outside of my Lenovo M720s computer.
The GPU pictured is a second hand Gigabyte 1050ti that I got super cheap on eBay.
I am using a thermaltake PCI extension ribbon from Amazon.
Thermaltake PCI-E 3.0 Gaming PC Modding X16 Riser Flexible Cable Upgraded, 2 Years Warranty, EMI Shielding Cover, - Black 200mm AC-053-CN1OTN-C1 : Amazon.co.uk: Computers & Accessories
Instructions:
- Print all the parts.
- Make a cut in the lid of your case just over the where the PCI slot is (hack saw or tin snips), it does not have to be perfect as I made a cover to hide your shame and protect the cable.
- Glue the shroud over the cut using super glue.
- Attach the PCI cable to the motherboard and route through the slot.
- Attach the GPU mounting bracket to the GPU then line it up with the slot and cable and glue it to the lid as well.
- Next using a couple of the board supports, support the end of the GPU by gluing these to the lid as well (see pic).
- Attach the PCI cable to the GPU.
- You shall ride eternal. Shiny, and chrome!