The Owl House Airship
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the Airship used by the Emperor's Coven in The Owl House
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Model of the Airship used by the Emperor's Coven in The Owl House.
| Dimensions | Length | Width | Height |
|---|---|---|---|
| 93mm | 93mm | 92mm |
The model is split vertically into to halves for printing, “airship-left” and “airship-right”.
Also included is a simple stand.
Print Instructions
Printed at 0.1mm layer height. Requires supports. Be carefull when removing the supports because this model has many thin pieces that break off easily.
The stand was printed at 0.2mm layer height and does not require supports.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
UPDATE [2023-11-18] Made the balloon smoother
UPDATE [2024-01-15] Added a horizontal bar to the stand to hold the airship better in place