1 / 11
SCX10 ting tong 14, 16, 20° C-HUB + 3 links mod — zdjęcie 1
1 / 11

SCX10 ting tong 14, 16, 20° C-HUB + 3 links mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's a 14° caster C-HUB for scx10 clone. On mine the caster is set at 0° which turns negative caster when the crawler…

Ocena
0 / 5
Polubienia
11
Pobrania
60
Wydruki
0
Wyświetlenia
410
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

2025 06 25 : News : i've added a full 3 links set : the C-hub and the panhard bar support, see pictures.
Beware : to have no bump steer the panhard and servo link need to be the same length and to be parallel.
Use the v3 and the servo support

It's a 14° caster C-HUB for scx10 clone.

On mine the caster is set at 0° which turns negative caster when the crawler is level :(

I made this 14° C-HUB to compensate for ~12° of axle and give a final ~2° of positive caster.

Possible to make any caster angle you want, just ask.

It's the right side, don't forget to mirror the HUB if you want left side too

I suggest printing them with the two tips pointing downward and using support.

12/06/20 : added improved version : 2° less camber b(8), 2° more caster (16) and harder/better/stronger arm.

05/09/20 : added the panhard version of scx-8-16-C-Hub-3Links.STL

08/11/2020 : more sturdier version after breaking one

05/01/2020 : modified panhard version of scx-8-16-C-Hub-3Links.STL to make it usable for both side.

22/10/2022 : added version with 5° of camber instead of 8

01/07/2024 : added version with 20° caster

Category: R/C Vehicles

Tagi