1 / 5
Yarky Y33 Back up camera mount for Jayco 195RB camper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A camera mount to hole the camera, clearance light and store all the wires
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)Powiązane
I made this mount to hold all the wire for the camera and to hold the clearance light. The body was printed out of ASA. Gasket are out of TPU. The camera can be mounted on the top or bottom. Also there is a small drain hole. Once you select the placement of the camera. Take sealant and seal the top drain hole. Use #10 or M5 hardware.