1 / 3
Filter housing for Hepa Filter 150x150x20 and 120mm Fan — zdjęcie 1
1 / 3

Filter housing for Hepa Filter 150x150x20 and 120mm Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filter housing for 120mm fans and 150x150x20 HEPA filter.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

The filter, along with the filter mat, is inserted into the rear (larger part) of the housing, and at the front, the 120mm fan is fastened with M3 screws for plastic. I opted for a fan variant that can be controlled via a remote control. Unfortunately, I can no longer upload pictures as I have had the filter with housing installed for a while now, but the assembly should be relatively self-explanatory, There are many cases that are visually similar; unfortunately, there was nothing here that matched the components I wanted to use for the filter system so ive created my own Model in Fusion.

Der Filter wird samt Filtermatte am hinteren (größeren Teil des Gehäuses) eingeschoben, und vorne wird der 120mm Lüfter mit M3 Schrauben für Kunststoff befestigt. Ich habe mich bei dem Lüfter für eine Variante entschieden, bei der man den Lüfter über eine Fernbedienung steuern kann. Leider kann ich nicht mehr Bilder hochladen da ich den Filter samt Gehäuse schon seit längerem verbaut habe, die Montage sollte aber relativ selbsterklärend sein. 
Es gibt viele Gehäuse, die von der Optik her ähnlich sind. Leider gab es hier nichts, das mit den Bauteilen übereinstimmte, die ich für die Filteranlage verwenden wollte bzw. habe, also habe ich selbst eine in Fusion 360 modelliert.

Filter : https://www.amazon.de/gp/product/B0BR4R9RPS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Fan: https://www.amazon.de/gp/product/B081SYD24Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 

Tagi