Colosseum mixer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A miniature version of a painter mixer model that is presumably better than the standard mixer.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This miniature mixer is designed to fit into a regular 200 ml glass and is intended for mixing small batches of paint. I found the design on the internet and the manufacturer swears that it is far better than the standard paint mixer in every possible way.
It can be fitted onto any drill with an M4 rod or a handle with an M4 screw (≤ 40 mm long). The handle is 100 mm long.
The handle should be printed horizontally for sturdiness. As for the mixer part I used supports for the middle. The outer perimeters are fine without. I recommend printing in PLA+.
I am thinking of ways to improve the design of this model, so feel free to leave any comments and thoughts on how to improve it and your user experience.