Riser for LG C1 OLED TV with cable management
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 30mm riser for the LG C1 OLED TV raises it above most soundbars for an unobstructed view. With cable access holes.
- Ocena
- 4,667 / 5
- Polubienia
- 18
- Pobrania
- 174
- Wydruki
- 3
- Wyświetlenia
- 1182
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
Riser for the LG C1 OLED TV to clear most soundbars. Fits 55" and 65" models. Features cable management routes and can be printed in parts on a Prusa MINI+.
Make sure to route the cables BEFORE you put the TV on top, otherwise I recommend a wooden spoon to help route the cables through the holes.
I printed it in PETG with 3 perimeters and 5% infill.
Includes pre-cut parts for beds with an area of 180 mm x 180 mm or larger. Print each part once for a complete set.
Includes a testprint for the dovetail connection (Dovetail_Test.stl) and a complete model in case you want to cut it up differently (LG_Riser_Skeletonized).