MTR3B Case for use with Micro-Clipboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a MTR3B radio case that can also be used with my (N6MTB) micro-clipboard for hand-held operation of the radio.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a MTR3B radio case. In addition to use as a case, it can be flipped around and coupled with my micro-clipboard for handheld operation of the radio and a morse paddle while also being to log onto a piece of paper.
The case is sized for a pretty snug fit with operating the radio. Depending on printer calibration deltas you may need to do a very slight scale up of the model.
The micro-clipboard use with this is sized for use with a field notes book. When used with this case you will need to cut to size your own log sheets. I have cutdown these large gridded sticky notes pads to for use with this clipboard when inserted into the radio case.
UPDATE: I have added a second STL file with the tabs on the center of the sides. This allows the case to work for folks who have done a capacitive touch keyer modification to the radio where the keyer nubs are on the lower right corner. You may also need to swap out the case retaining screws to countersunk ones to use this case.