1 / 1
Heewing T1 vtol for gdw425mg servo and emax 2004 motors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
updated next revision of the 3d printed vtol nacelles for the heewing t1
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
updated version
changes:
-servos changed to GDW DS 041MG
-arms beefed up
-motor plate has tab for zipting motor wires to.
-m2 hardware for fastening nacelles halves together.
Needed:
m2 screw kit from amazon
2x 4x10x4 flanged bearing
2x GDW DS 041mg servo
8x #2 self tapping screw for motor plate to arm connection
printed in petg
recommend to print nacelles nose down.
-3 walls
-40% infill
