1 / 6
Stealth TPU air tag holder for 32mm holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple air tag holder for hiding air tags in vehicles or devices
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This air tag holder will work with any surface that is 2mm thick. You just need to drill a 32mm hole.
Printing instructions
- Print in TPU,
- 0.2mm layer height is fine
- A textured plate is preferred
- No need for supports
- Pro tip: dry your TPU before printing. Trust me.
- If you have troubles inserting, then don't use infill for the top part of the insert
Assembling instructions
- Drill a 32mm hole
- Push the air tag into the base of the holder, with the silver disc towards you
- Insert the insert
- Then insert the holder into the hole.