Multifunction Makita batery holder 18v
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You have too many makita batteries, don't worry, I have a solution for you.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 723
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Thanks to these holders, your batteries will not roll. Just take two screws and screw them where you need and how long you need, you can use it just as a cover for your batteries or combine two batteries into one, there are many options, it's up to you which one you choose.
I RECOMMEND PRINTING AT HEIGHT, WITHOUT SUPPORTS!!!!!(Reason of easy removal)
Installation is very simple...
You will need a few screws, a drill and battery holders.
First step:
Screw the bracket to the wall with two screws.
Second step:
If you need more holders with you, insert another holder into the second one as shown in the picture.
Third step:
Screw it. (One screw is enough for the middle brackets. For the outer ones
but I recommend giving two or more.)
Fourth step:
insert the battery until you hear a click and enjoy.
HAPPY PRINTING!!