AnkerMake M5c Safe Zones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Safezones for AnkerMake M5c
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 122
- Wydruki
- 2
- Wyświetlenia
- 1591
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The AnkerMake M5c shares the same design flaw with the M5.
THE PROBLEM: The screen and filament pods on each side of the printer overlap the base of the printer. If the gantry is up, you might put something in that space, and when you start a print, the printer will return to home and crush whatever was put in that space. This will cause a printer error, possibly even breakage.
THE SOLUTION: Print these small "save zones" and clip them around the gantry legs. They serve as a physical and visual reminder not to place anything in that area. It's an active work zone!
I got the Idea for those save zones from Pluggy.
There are two .stl files. One is a simple Clip that covers all dangerous areas.
The other file can be used together with the Accessory Bins for M5C designed by PaulFirschin_1114995 https://www.printables.com/de/model/571998-accessory-bins-for-ankermake-m5c
You can print the same file for both sides of the Printer.
Print Settings
Printer Brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
No
Supports:
No
Infill:
25
Filament:
Azure Film PETG Green Transparent
Category: 3D Printer Accessories