1 / 3
C beam carriage belt connection for tevo little monster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the belt holder/connector for the carriage for the tevo little monster. It will probably…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a replacement for the belt holder/connector for the carriage for the tevo little monster. It will probably work for the open builds c-beam carriage too.
This should be printed in resin, but might work with a normal printer too.
Attachment point for the belts on the carriages on the tevo little monster
Added V2, which works without screws. When using version 1, you should use a screw to clamp the belt
Category: 3D Printer Parts