Bicycle crank arm side stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side stand for home-parked bicycle
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 257
- Wydruki
- 1
- Wyświetlenia
- 1190
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
To avoid any other damage to my bike when home parked unavoidably slips or when I make maintenance, I designed this stand which inserts on the crank arm, of course, this is in line with others with the same principles but I find that this is more suitable for strength considering 3d printing. this fits 175mm Altus arms for a bike with 28"(650mm od) wheels. There is a step file to modify for your needs.
PETG : walls:4, top-bottom:7, infill 50% triangles (can take up to 6-7 hours printing for 45mm/s.
Update: a beefier model with some edge reinforcements was uploaded, the old is still very good and simpler but if you abuse the sidestand more the newer version for sure will be safer.