Wall-mounted Accessory hanger for Philips Vacuum Cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mounted hanger for the „tool heads“ of Philips SpeedPro Max, Aqua Plus Vacuum Cleaners, 5000-9000 Series
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 240
- Wydruki
- 3
- Wyświetlenia
- 1328
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: Reuploaded model file in 101% scale for better fit.
________________________________________________________________________________________________________________
I designed a hanger for the different accessories of my vacuum cleaner to have them ready to go next to the machine itself instead of cramping them into any other plays where I would have to go and get the right one. They just click onto the hanger the same way as they get attached to the vacuum cleaner. It is not the perfectly tight fit but they don’t come loose without pushing the lever.
Print with increased perimeters (like 4) to increase the resilience of the notch.
PLA holds up well by now.
Note: Second picture shows a test piece with chamfers which I did not include in the final version