1 / 1
Filament roller. ~110mm rolls
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic filament roller that uses 4x 608 bearings and 4x rubber pads to keep it from moving.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Needs some support for the bearing pegs and on the underside of the roller depending on the printer.
Added some modifiers to make the pegs stronger.
Some rubber pads under the feet are recommended to keep it from sliding around.
Optional spacer if you'd like to keep a couple in line.
The roller is about 110mm wide, which I needed for some of my 3kg rolls.
