1 / 8
Hockey & Lacrosse Glove Whistle Holder — zdjęcie 1
1 / 8

Hockey & Lacrosse Glove Whistle Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach a coach's whistle to your hockey or lacrosse glove.

Ocena
0 / 5
Polubienia
17
Pobrania
49
Wydruki
0
Wyświetlenia
907
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

It's a pain to try to use a coach's whistle that's on a lanyard around your neck if you're wearing hockey gloves. So I made a holder for the whistle that, along with the strap of your choice, will attach it to your glove.

Two versions, one mounted straight, the other at an angle.

Use TPU or another flexible material.

I had these straps already: https://www.amazon.com/gp/product/B07J4P7WBD. The length of the slots for these straps is 36mm. You can adjust the Y on yours to make the length fit whatever straps you have.

If your strap doesn't have velcro like the one above, you can consider printing out one of @rorys3d's Robust Buckles: https://www.printables.com/model/281536-robust-buckles

Specs for examples in pics:

Zyltech Black TPU (Shore hardness: 95A)
.24mm layer height
4 outer walls
Inside to Outside wall ordering
5% infill (pattern doesn't matter)
 

Included 3mf file was used in Cura, not PrusaSlicer. Printing the angled one took 23 minutes on an Ender 3 S1 with a SonicPad.

This is the whistle in the photo: https://www.walmart.com/ip/American-Whistle-Corporation-American-Classic-Whistle-Black/908743265

Tagi