Electronics Enclosure and Frame for LED Acrylic Desk Mat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed parts for my custom LED-lit build mat, which I use as a backdrop for shooting video and streaming Gunpla builds.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
These are the parts I designed for my custom LED desk mat. I use it for shooting video and live streaming my Gunpla builds, and it can also stand vertically behind a built kit to serve as a color changing photo backdrop.
All of these parts were very specifically designed to fit the electronics that I chose for this project. The outer frame fits around a sheet of ½ inch thick rectangular acrylic that is 18x24 inches. The electronics enclosure fits an ESP32 board, power connector, and three WAGO clips that I used to connect all the wiring.
If you want more information about the project, I made a YouTube video covering the entire build process: