Large Table Addon for REVOPOINT 3D SCANNER (INSPIRE) revolving table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transform the supplied small 12cm revolving table in a 20cm table, allowing to maintain flat the black marked vinile top
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
With the REVOPOINT INSPIRE 3D scanner you find supplied a small 12cm revolving table, and a large 20cm black marked table top to scan larger objects.
Unfortunately the table top is thin vinile and does not keep the top surface flat, and in addition has no capability to hold any object on it.
This problem is solved by this table top, that transforms the small 12cm revolving table in a 20cm revolving table, allowing to put wider objects and keeping the 20cm marked top flat.
You can also decide to print two of them, and glue the supplied marked vinile perfectly flat on one, and keeping the second one without markers.
You can print it in PETG or PLA. The supplied Binary GCODE is for the MK4 IS with Firmware 5.1.0 Alpha2 or higher. If your printer still does not support binary gcode, please re-slice the model with PrusaSlicer 2.6.0.