Gira System 55 Frame for Aqara Opple Zigbee Switch triple 3-fach
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gira System 55 Frame for Aqara Opple with 2 spots for normal switches or sockets
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 987
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Wanted to include the low-cost but nice Aqara Opple Zigbee Switch in my household.
I am using the Gira 55 System, which is quite common in Germany.
As the Opple Switch is to big to fit a frame I made my own.
This Version is a Frame for two normal sockets or switches in the Gira System and the Opple Zigboard on top (or below).
So Its easy to install as an attachment to the normal but dump light-switch.
The print needs to be sanded an painted to get a good look.. its FDM printing after all.
There is a Version with 2 or 1 places avaiable as well- Check my designs