1 / 2
1-1/4" Headset / Steerer Tube spacer for Pro Gap Cap Top Cap — zdjęcie 1
1 / 2

1-1/4" Headset / Steerer Tube spacer for Pro Gap Cap Top Cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This spacer is designed to sit on top of a stem, and mesh with the Pro Gap Cap headset topcap, which is abnormally deep.

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
540
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a 1-¼" headset spacer designed to sit on top of a stem. The interior is designed to fit the top cap of a Pro Gap Cap 1-¼" expander plug, but it will work with most top caps for 1-¼" headsets. 

In my particular case I needed a spacer to set headset preload because the top of my expander plug extended above the top of the stem. Even if it had been below the top of the stem, the height of the Pro top cap necessitates a spacer to create the gap needed for preloading.

This spacer will not fit below a stem and I STRONGLY recommend against using any 3d printed spacers below a stem. The risk is simply too great should they crack. Installed above the stem they are not part of the load path when using the bike.

I recommend printing this upside down, with the 90° shelf facing up.

 

Edit 11/4/24: Added the vanity cover I've been using for several months now. If you want fewer spacers above your stem, and don't mind a little faff, you can preload using one of the other spacers (or regular 1-¼" spacers) and then tighten your stem bolts. After that, you can replace the top cap, bolt, and spacers with the vanity cover. It sits directly on top of the black toroid protrusion on the top of the gap cap, and adds a minimum of stack while simultaneously sealing the top of the steerer. The model I've uploaded will work with up to 1.75mm of steerer above the top of the stem.

 

I'm happy to make custom height spacers or vanity covers upon request.

Tagi