Mole 3D Scanner Laser Rangefinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is mount holds 2 angled laser pointers to show the optimal scanning distance for the Mole 3D scanner by 3DMakerPro.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a rangefinder that uses two laser pointers (link below) to show the optimal scanning distance for the Mole 3D Scanner by 3DMakerPro. The lasers converge at 230mm. There is a second file that omits the laser pointer holders/tubes in case you need to use different parts and make your own mount. It is very difficult to maintain the correct distance when hand scanning objects with the Mole so this should help. It is printed in one piece and needs supports (I use a 60% overhang). I printed mine using eSun PLA+ on an Ender 3 with direct drive and a glass bed. It took 10 hours, so be very careful not to break the arms when removing supports!
https://www.amazon.com/dp/B09PQD36CW?ref=ppx_yo2ov_dt_b_product_details&th=1