Piggy Bank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Piggy Bank in shape of a 33 cl can. NOW! Bonus STL files
- Ocena
- 4,727 / 5
- Polubienia
- 125
- Pobrania
- 721
- Wydruki
- 12
- Wyświetlenia
- 2811
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
.gcode files sliced with Prusa Slicer 2.6.1
The .3mf files for the cans are with Paint-on seams on the other side of the coin-hole, because otherwise the seams came in the side with the hole and it didn't look nice.
So if you are using another slicer then remember this!
The walls are 2mm thick, maybe that's an exaggeration, but that's how it is.
Can 1: is with a coin-hole only so you can add you name or similar in the slicer.
Overhang perimeter is 1 second du to the coin-hole but should be no problem
Can 2: is with a Piggybank image from https://www.svgrepo.com/vectors/piggy-bank/monocolor/
Overhang perimeter is 3 seconds due to the coin-hole and the little piggy but should be no problem.
And one important thing! If you screw the lid on to hard it is tricky to screw off!
But it should be :-), right?
Feel free |
| https://paypal.me/gillislindstrom |