TPU Foot for cr10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rubbery tpu foot for cr10
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is a model I created to accompany a leg riser system for the CR10: https://www.thingiverse.com/thing:4372472
I wanted to give it a squash ball springyness without modifying the actual leg. So it needs to be printed in TPU or another soft filament. Adjusting the amount of walls will give it a more firm or softer feel when printed with a low infill. Foot for middle leg sections are a little tight, but they fit in. They also are the perfect size if you want to add some side panel covers to fit in the leg slots without having to attach them to anything.
Layer Height : .28
Walls : 2
Infill : 8 (i used honeycomb)
Can be printed without supports if object is reoriented with the larger part on the bed.