Part Sorting Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A part sorting tray for building and disassembly/re-assembly.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 322
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A 10 space part organiser, designed to help with disassembly/reassembly or any other small part sorting exercises. Easy to use a finger to get a small part out of it, the front angled part allows you to either write on or put tape on to put information on it (example numbering).
Allows you to make logical steps as you take something apart, matching screws/parts up to each step taken.
Print the last 2-3 layers in a different colour for a really nice two-tone finish.
Samples printed on a Prusa MK4 in PLA.
242 x 76 x 12mm dimensions. I plan to add a slightly less wide version for smaller printers.
Prints very well in the orientation you use it in, angles all kept to 45 degrees.
Corner squares designed to accept 8mm rubber feet. 3M make good ones. I used 8x2.5mm stick on, they give a lot of grip. You can add more to the central parts if you need more stability.