1 / 1
T-Connector Hose Tube with parametric Diameters and Length — zdjęcie 1

T-Connector Hose Tube with parametric Diameters and Length

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This parametric T-connector fits to 3 air tubes with 2 different diameters. I use it to connect 3 x 38mm venting tubes

Ocena
0 / 5
Polubienia
24
Pobrania
215
Wydruki
0
Wyświetlenia
815
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This fully parametric T-tube joint allows to connect 3 air tubes. The 90° side tube can have a smaller diameter than the 2 main inline tubes. All tube diameters, wall thickness and tube length can be easily adapted via OpenScad Customizer. The provided STL files are some examples of typical setting combinations.

It prints nicely in PLA with the 90° tube heading upwards, I propose to use some brim for better plate fixation. A small amount of support (only inside the horizontal tube) maybe necessary, but this depends on your printers capabilities to produce overhangs.

I use this with 37.5 / 37.5mm to connect 3 x 38mm suction air tubes as part of an inhouse venting system.

Tagi