1 / 4
Larger Version of Easy Access - AMS Desiccant Box - Remix Set — zdjęcie 1
1 / 4

Larger Version of Easy Access - AMS Desiccant Box - Remix Set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fully utilize space between first stage feeders for desiccant. Easily removed/replaced without removing spools.

Ocena
5 / 5
Polubienia
75
Pobrania
1011
Wydruki
8
Wyświetlenia
5899
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Also available with ready-to-go print profile at MakerWorld for your convenience.

This is a two-box set that completely fills out the available space between AMS first stage feeders. First, the boxes are lengthened (vertically taller than the original) to fully fill out the vertical space. The second box is a shorter variant that fills up the space behind the first box, giving you even more volume for desiccant while eliminating empty space for the boxes to rattle around.

I printed the original with PETG and the lid wasn't held tightly enough and would pop off easily. This version replaces it with a tighter-tolerance, deeper, dovetail slot.

Print both boxes & lids. Fill with desiccant. Close lids (lids are identical). Lower the taller box (with tab towards back) between the first stage feeders and push it forward against the front of the AMS. Then, lower the shorter box (with tab towards front suggested) behind it. All without removing any spools.

Many, many thanks to hunkoys for designing and sharing the original model and Fusion 360 design file. It is a great design and the design file is very cleanly done. I'm also sharing the modified/remixed .f3d design files here.