Moonlander Tripod Mount V3 - Reupload
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the moonlander tripod mount created by jrockway and remixed by CasualRoses and then ahonnecke
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A remix of the moonlander tripod mount created by jrockway and remixed by CasualRoses and then ahonnecke.
Description from CasualRoses and ahonnecke
CasualRoses Description:
This lets you connect your Moonlander keyboard to a standard tripod mount (1/4"). The threads are modeled and they worked fine for me printed in PLA on my Ender 3 Pro. I used M2.5x12mm machine screws. I would prefer to have a 1-2mm more screw length, but the next size I have is 16mm and is definitely too long.
This is a remix with correct hole spacing. The previous model used 19.1mm, but was only able to get one or two screws installed. I measured the hole spacing at 3/4", which comes out to 19.05mm. I also made the holes 3.1mm in diameter to give a little more clearance.
ahonnecke Description:
Countersunk the screws to I could get more of the 1/4 thread