Tiny Palestine Flag for Bambu w/AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a tiny Palestine flag.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a tiny Palestine flag. I am eventually going to turn it into a pin, but for now, it is just a small flag. Nothing more, nothing less!
The profile (which is for Bambu slicer) sets 0.2mm layer height, the model it prints face down and consists of 5 objects. If you leave it at this size, it will print solid (5 top and bottom layers).
It prints 2 layers of color and then the rest as a solid color, I chose black for that solid color. You can change the color choice of the remaining color by adjusting AMS color selection for Flag 5 object in Object view.
Flag 5 object also is reduced to only 20% wall overlap, but the other objects should print at 40% to make sure there are no gaps.