5 tealight candle holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5 different design made for small tealight 40mm diameter.
- Ocena
- 5 / 5
- Polubienia
- 158
- Pobrania
- 711
- Wydruki
- 4
- Wyświetlenia
- 2140
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed them all with 0.15 layer height with a 0.6 mm nozzle and with 5 different matt PLA filaments.
Print time with those settings are between 9 to 12 hours each, so if you don't might a rougher surface look, feel free to use a higher layer height.
The files are named after the colors of the print.
No support or brim needed.
AVOID STRINGING!
Make sure you're print setting doesn't course stringing, otherwise these models will have a lot between each of the spokes/pillars.
If you have stringing, dry your filament and print a temperature tower. You're most likely printing with too high a temperature.