1 / 4
Sanding Block 115x140, slightly improved
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my design based on PointNemo's sanding block with a self-aligning bed and a knob with a flush surface.
- Ocena
- 4,875 / 5
- Polubienia
- 108
- Pobrania
- 637
- Wydruki
- 8
- Wyświetlenia
- 2537
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 8) (Komentarze: 11)Remiksy (0)Kolekcje (140)Powiązane
I really like the overall design and the comfortable grip shape of the original. This is my slightly improved version of a sanding block based on PointNemo's design.
I printed mine with eSun PLA matte mandarine which has a nice soft touch.
Need other dimensions or have comments on how to improve? Let me know!
Update 2023-12-17: Revised knob with smoother top surface and improved thread.
Improvements:
- Knob has a flush surface to rest your palm on. Use a large screwdriver or a coin to tighten.
- The interface between top and bottom is bevelled so that the bed self-aligns and slightly pulls in the sandpaper.
- Print the top part upright to get a clean surface and better grip.
Printing parameters:
- Resolution: 0.2 mm (top), 0.15 mm (bottom and knob)
- Perimeters: 4
- Infill: 15%, Gyroid
- files in print orientation
- organic supports for top recommended (see photo)
Assembly:
- added some thin rubber sheet to the bottom, cork also works