Simple Crimp Rock Climbing Hold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Crimp Rock Climbing Hold for vertical to only slightly angled walls
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 548
- Wydruki
- 6
- Wyświetlenia
- 1939
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Rock Climbing Crimp Hold 1
Edit 8/26/23: Added another version with an additional screw hole to prevent turning. The hold has never turned on me but in a boulder I'm setting it will be used as a foothold so the extra screw hole is a preventative measure.
Edit 11/16/23: Fixed dimensions on version with extra screwhole, for #10 screw
Description
Very nice and small crimp with the smallest bit of incut
Hole size is for 5/16-18 bolt with washer and #10 screw, comment if you need a different size
Print with Cura's fuzzy skin experimental setting for texture
Fuzzy skin settings used:
Fuzzy skin thickness: 0.3 (mm)
Fuzzy skin density = 3.0 (1/mm)
Infill should be at least 30%, with at least 4 walls. It's only a small crimp so it doesn't need to be anything crazy unless you will also use it as a foothold.
Dimensions in drawing are in inches.
Enjoy!
Category: Sport & Outdoors