Purple Cobble Ledge Climbing Hold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ledge/jug hold for vertical to very angled walls
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 601
- Wydruki
- 4
- Wyświetlenia
- 2101
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A ledge/jug hold for vertical to very angled walls
11/15/23 This is 1 of 12 climbing holds of my first rock climbing hold pack. I just listed the pack on cgtrader and Cults3D for a very reasonable price! I have created all of these holds myself and I think they are very unique and offer great versatility for your home climbing wall!
Here is the link to the pack:
https://www.cgtrader.com/3d-print-models/hobby-diy/other/star-pack-climbing-holds https://cults3d.com/en/3d-model/tool/star-pack-climbing-holds
Mounting information:
3/8-16 bolt hole with 3/8 washer (3/4 OD washer)
No. 10 screw for the screw hole
DO NOT OVERTIGHTEN
Print with Cura's fuzzy skin experimental setting for texture, fuzzy skin settings used:
Fuzzy skin thickness: 0.3 (mm)
Fuzzy skin density = 6.0 (1/mm)
Fuzzy skin Point Distance = 0.1667 (mm)
Infill should be at least 30%, with at least 6 walls
I only weigh about 145 pounds and I've never had a hold break on me but be responsible and don't skimp out on material and print with more infill/walls for a stronger hold
Enjoy and let me know if there are any particular holds you want designed for your home walls! Also leave a comment if you need a version with different mounting holes, I will quickly add another STL file with custom bolt holes and screw holes if you need it.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
.3
Infill:
≥30
Category: Sport & Outdoors