1 / 4
Badge Holder with Yubikey no supports with a stronger keyring hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix with a reinforced keyring hole
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 1101
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (17)Powiązane
This is a remix of https://www.printables.com/model/564415-badge-holder-with-yubikey-no-supports
This is a card holder with a Yubikey USB multi factor authenticator compartment.
The small keyring hole has snaped so I've tried to improve it a bit.
Features:
- Moved the keyring hole a bit inwards.
- Increased the thickness around the keyring hole for more rigidity.
- The longer slit was removed as it was never used.
Print settings:
- Material: Any
- Layer height: 0.2 mm
- Support: No
- Print it in the downloaded orientation
- I have printed one in PLA and another one in PETG to see what works best. Time will tell.
I hope you like it! Let me know in the comments 😀
If you wish, you can buy me a coffee ☕
