simple milling drill box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple two-component box for cheap milling drills (Fräsbohrer)
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My cheap milling drill set came without a box, this simple two-component design will make due. I see these generic sets a lot, usually they consist of five pieces - 3mm, 4mm, 5mm, 6mm, and 8mm.
I bought these Fräsbohrer (that's how we call them in Germany) at Lidl for a good price some weeks back, they already came in very handy to enlarge the hanging-holes on my kitchen utensils :)
printing advice.
The base is meant to be printed in TPU, that grabs the drills properly; I recommend concentric infill at around 50% with 3 walls, that leaves not as much squish. The top can be printed in any material you like.