Pocket clip repair/replacement for Leatherman Free/Bond/Arc multitools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Piece to allow you to pocket-clip your Leatherman Free/Bond/Arc multitools when the clip breaks off at it's weak point.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 951
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
See the onshape model here: https://cad.onshape.com/documents/fb7cdc0eb4e7c48777bf85b3/w/5ec9b5eeda8c26fe761486f7/e/ec59cf0c960ffedf27eba1d1?renderMode=0&uiState=655a86623826926a557f8fa2
My Leatherman Arc multitool comes with a pocket clip attached. Unfortunately, the pocket clip has some fatal design flaws. First, it has a weak point near the top of the screw “slot”, where the any force on the clip travels through two thin rails. Secondly, it has a curved shape which catches on things much more easily than my other tools. Between these two things, it's bent a couple of times since the tool's release (a few weeks ago). I bent it back, but ultimately it broke off at the weak point as you can see in the picture.
I could have probably got a replacement clip, but it would be the same flawed design.
As a solution to this, I ended up making this part – so far it has caught less than the previous clip and hasn't broken off yet. It simply slides on snuggly. I have considered maybe adding some sort of clipping mechanism to hold it in place, but has seemed to work out as is so far.