Action Camera Mount Base (GoPro-style, import this into your project)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Functional GoPro-style connector base for your custom 3D printed designs.
- Ocena
- 5 / 5
- Polubienia
- 187
- Pobrania
- 3002
- Wydruki
- 10
- Wyświetlenia
- 13 317
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This model has been verified for compatibility using a GoPro Hero 4 case.
It is not an official GoPro part — geometry recreated for functional interoperability.
Dimensions:
- Diameter (x, y): 29.5 mm
- Height (z): 17 mm
- Hole size: M5 screw & nut compatible (original GoPro screw fits as well)
- Max. screw head diameter: 10–10.5 mm
Printed successfully without supports at up to 150 mm/s, though slower speeds are recommended.
______________________________
Q&A
Q: Nice, thanks for the G-code file!
A: You’re welcome! Yes, you can technically print the included G-code directly — but please note that this file is only provided to show estimated print time and added weight at a 0.15 mm layer height using PrusaSlicer’s default speed profile.
The STL is intended for integration into your own designs, not as a standalone print.
Q: How flexible is the mount integration? Any drawbacks?
A: This mount was designed for maximum strength, which slightly limits the camera’s tilt range to approximately ±40° when used with a GoPro-style case.
Please keep this in mind if you need a wider range of motion for your camera.