1 / 5
Ender 3 S1 Y-Axis Stepper Cooling Fan 40mm or 60mm — zdjęcie 1
1 / 5

Ender 3 S1 Y-Axis Stepper Cooling Fan 40mm or 60mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed to fix the issue of the bed heating sponge touching the top of the cooling housing and added a few more things.

Ocena
0 / 5
Polubienia
26
Pobrania
110
Wydruki
1
Wyświetlenia
666
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I remixed it to fix the issue with the bed heating sponge touching the top of the cooling housing, preventing the bed limit switch from triggering. 

Increased the lateral space to draw in more air and removed the rear part that was causing blowback.

You can use it for pushing or pulling air; I prefer pushing air towards the bed to prevent hot air from passing through the motor

 

Note: If possible, print it in a material that can withstand temperature. I printed it in PLA+ and had no issues, but you never know. Also, be careful with the top part of the housing, as the wall is very thin and it has become a bit delicate.

Note 2: Just added the 60mm version as requested.

Btw, this is my first remix. I hope everything works as well for others as it did for me. Thanks to @GiuseppeCaputo for the original design.

Tagi